GunSkins Magwell Skin Camo Wrap Vinyl Decal Kit for Lower Receivers

Description

Magwell Skins are Do It Yourself Vinyl Decals for Lowers.
Cover and protect your lower mag well with GunSkins Magwell Skins! Our precut templates make installation quick and easy. Simply clean the surface, peel and press, add heat to conform, and trim away any excess material. GunSkins offers top of line camouflage and specialty patterns to choose from, fit for any application.
GunSkins Magwell Skins are designed to fit mil-spec lowers for modern sporting rifles. The kit includes pieces for the left and right side of a single magwell.
Magwell Skin Kit Template with Precut Pieces
GunSkins Magwell Skins are designed to fit compatible lower recievers that are mil-spec
. The DIY vinyl wrap kit may require the user to trim to fit for custom lowers. This also includes airsoft replicas and BB guns. The kit comes with the following precut pieces:
– Left lower
– Right lower
They are waterproof and have a non-reflective matte finish. Magwell Skins conform to any shape and are easy to install. May also be used on custom lowers, though it may not be a perfect fit.
Magwell Skins are available in a variety of specialty camouflage patterns.
Frequently Asked Questions
Why won’t the vinyl stick to the surface of my gun?
You must thoroughly clean the gun before installing the wrap. Use a gun-specific degreaser and a small brush, scrubing all recessed areas to remove oil and dirt. Wipe clean using a lint-free cloth or rinse with warm water and let air dry.
Can the wrap be removed?
Magwell Skins are removable and have no effect on the finish. To remove, heat the material with a heat gun/blow dryer and peel off piece by piece.
Is it waterproof?
​The high-performance vinyl is non-porous, which means that the material creates an air-tight seal that also prevents water from getting in or out. As a matter of fact, GunSkins are completely waterproof.
How durable are GunSkins?
GunSkins are made from a high-performance vinyl. The material is 6/10 mm in thickness and will add an extra layer of padding protection to the surface of your gun.
Step by Step Installation Instructions
Clean the Surface.
Use a gun-specific degreaser and a small brush to work away all dirt, oil, lubrication, and residue. Rubbing alcohol is a good last step to remove moisture, but alone is not strong enough to cut through gun oil.
A clean gun makes for a clean install.
Peel and Stick.
Peel the material off the template, one piece at a time. Place it centered on the surface and work it in using your fingers.
​If need to, peel off and reposition until you are satisfied with the placement.
Heat and Trim.
Use a heat gun or blow dryer to get the vinyl to conform to the shape of the gun. Take your time and work away wrinkles and air bubbles.
​Use a sharp hobby knife to trim away excess material. Overlap the extra and press firmly to set. Heat again to finish.